Edge-Core ES4625 Guia de Instalação Página 49

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
Vista de página 48
4-3
Fiber Optic SFP Devices
4
Figure 4-2 Network Wiring Connections
Fiber Optic SFP Devices
An optional Gigabit SFP transceiver (1000BASE-SX, 1000BASE-LX or
1000BASE-LH) can be used for a backbone connection between switches, or for
connecting to a high-speed server.
Each single-mode fiber port requires 9/125 micron single-mode fiber optic cable with
an LC connector at both ends. Each multimode fiber optic port requires 50/125 or
62.5/125 micron multimode fiber optic cabling with an LC connector at both ends.
Warning: This switch uses lasers to transmit signals over fiber optic cable. The lasers are
compliant with the requirements of a Class 1 Laser Product and are inherently
eye safe in normal operation. However, you should never look directly at a
transmit port when it is powered on.
1. Remove and keep the LC port’s rubber cover. When not connected to a fiber
cable, the rubber cover should be replaced to protect the optics.
2. Check that the fiber terminators are clean. You can clean the cable plugs by
wiping them gently with a clean tissue or cotton ball moistened with a little
ethanol. Dirty fiber terminators on fiber cables will impair the quality of the light
transmitted through the cable and lead to degraded performance on the port.
3. Connect one end of the cable to the LC port on the switch and the other end to
the LC port on the other device. Since LC connectors are keyed, the cable can
be attached in only one orientation.
E
qu
i
pment
R
ac
k
(side view)
Network Switch
Patch Panel
Punch-Down Block
Wall
witch 10/100
6724L3
E
S
4
5
2
4
C
CheetahSwitchW
orkgroup-4549
ES4549
45
46
47
48
StackMaster
StackLink
Power
RPU
Diag
Module
Master
Select
StackID
Console
12
3
4
5
6
7
89
10
11
12
13
14
15
16
17
18
19
20
21
22
23 24
25
26
27
28 29 30
31 32 33
34
35 36
37
38
39
40 41
42
43
44 45 46 47 48
Vista de página 48
1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 75 76

Comentários a estes Manuais

Sem comentários